Pressure washing is a technique greatly used in maintaining the integrity and cleanliness of patios, rooftops, walkways, pathways, doorways, industrial buildings, and even farming areas. The use of a pressure washer to direct water into effectively removing dirt and debris from a large surface area is very practical for both the home owner and the business person.

The use of a pressure washer entails a lot of care because of the fact that it uses a highly pressurized mechanism to be able to propel water forcefully for stain removal and surface renewal. There are different types of surface area present and there are different ways in cleaning each of them. It is helpful to know the techniques and general considerations when pressure washing different types of area.

First of all, a pressure washer uses a wide range of accessories to be able to produce the right type of pressure depending on the surface area to be cleaned. For example, when you are cleaning a wooden floor, it is pertinent to use a flat fan tip to provide the right pressure for such a delicate surface.

Wooden surface areas are much easily damaged when you apply a high pressure within close proximity. If your power washer is has a 2,000 psi value or more, then be careful not to point the nozzle too close to the surface because too much pressure may ruin the wooden floor and make it fuzzy looking after pressure washing. Another thing to remember is to clean the whole length of the wooden board evenly so that “stop” and “start” marks are prevented.

All you have to do is to point the power washing tip from a safe distance working your way near the surface area you wish to be cleaned. The trick with wooden floors is patience and a little coordination. Instead of doing the usual “back and forth” motion of spraying, you have to gradually move the cleaning tip across the whole length of the board before moving on to the next area. For masonry surfaces, it is better if you spray the surface using a circular motion so you can prevent patches of un-cleaned surface from showing after power washing.

Power washing accessories are also helpful if you want complete coverage and absolutely wonderful results after power washing. Accessories such as nozzles or tips have different uses based on the degrees and spray angles they are able to convey on your pressure washer. Basically, a 0 degree angle is the smallest and will deliver the greatest power when it comes to removing dirt.  For easily removable substances or debris, a wider angle is used for more ease and safety when cleaning.

For safety purposes when using nozzles or tips, check that the accessory is tightly attached to the power washer so that it will not get damaged or damage others when you turn on the pressure washer. A loosely attached tip or nozzle is one of the common causes of injuries and accessory damage.

Using environmentally friendly cleaning detergents are also highly recommended as you can help save your environment while maintaining the beauty of your home. Make sure that the chemicals you choose are appropriate for the surface you are going to clean. Remember that wooden floors have different requirements, so read the label of the detergent first before application.

Lastly, when planning to clean structures such as roof tops with shingles, postage boxes, windows, vents, or flower boxes, it is important to secure them first prior to power washing . Aside from that, carefully apply pressure to the object as they are easily broken by the high pressure applied by the washer.